Fiber Laser Cutting Machine | CNC Plasma cutting machine

One-high efficiency Laser cutting machines are always connected to several numerically controlled rotary tables to achieve numerical cutting. It only needs to change the NC program to accommodate components of different sizes, which can perform 2D cutting as well as 3D cutting. Two-high speed When cutting a low carbon steel sheet of 2 mm thickness, the 1200W laser cutting speed is 600 cm min; When it is a 5 mm thick polypropylene resin plate, the cutting speed is 1200 cm min. The material does not require a clamping fix in the laser cutting process. Three-high quality cutting Laser cutting features a thin kerf. The two sides of the kerf are parallel and the kerf is perpendicular to the surface. The cutting accuracy can reach 0.05 to 0.05 mm. The cutting surface is clean and fine, with a roughness of tens of microns. Cut components can also be used directly without further machining. After laser cutting, the heat affected area is very small and the material near the kerf is not affected...

Laser Cutting Machine Work Step By Step A laser cutting machine works by focusing a laser beam of light on a piece of material. The laser light is so high-powered, that when it is focused, it is cut enough to raise the temperature of the material or vaporize the material, focusing the beam over a small area. Often, an assist gas is used to help push the molten material out of the cutting area. This is especially true for materials such as plywood or for cutting thick sheets of metal. To cut shapes, the laser head is moved, allowing a line to be cut instead of a small pinhole, using some form of gantry to position the beam on the new material. Types of motion systems include rack and pinion, ball screw, and linear motor. Linear motors are the most expensive, but also the fastest and most accurate. Racks and pinions provide nearly the same speed and accuracy, but for a lower price. Some small radical lasers may use timing belts and stepper motors to move their laser heads. In all cases, ...